Inheritance diagram for Slic3r::FillConcentric:

Public Member Functions
virtual	~FillConcentric ()

Public Member Functions inherited from Slic3r::Fill
virtual	~Fill ()

virtual bool	use_bridge_flow () const

virtual Polylines	fill_surface (const Surface &surface)
	Perform the fill. More...

coordf_t	spacing () const

Protected Member Functions
virtual Fill *	clone () const

virtual void	_fill_surface_single (unsigned int thickness_layers, const direction_t &direction, ExPolygon &expolygon, Polylines *polylines_out)
	The expolygon may be modified by the method to avoid a copy. More...

virtual bool	no_sort () const
	Do not sort the fill lines to optimize the print head path? More...

virtual bool	can_solid () const
	Can this pattern be used for solid infill? More...

Protected Member Functions inherited from Slic3r::Fill
	Fill ()

virtual float	_layer_angle (size_t idx) const
	Implementations can override the following virtual method: More...

direction_t	_infill_direction (const Surface &surface) const

Additional Inherited Members
Static Public Member Functions inherited from Slic3r::Fill
static Fill *	new_from_type (const InfillPattern type)

static Fill *	new_from_type (const std::string &type)

Public Attributes inherited from Slic3r::Fill
size_t	layer_id
	Index of the layer. More...

coordf_t	z
	Z coordinate of the top print surface, in unscaled coordinates. More...

coordf_t	min_spacing
	in unscaled coordinates More...

float	endpoints_overlap
	overlap over spacing for extrusion endpoints More...

float	angle
	in radians, ccw, 0 = East More...

coord_t	link_max_length

coord_t	loop_clipping
	In scaled coordinates. Used by the concentric infill pattern to clip the loops to create extrusion paths. More...

BoundingBox	bounding_box

float	density
	Fill density, fraction in <0, 1> More...

bool	dont_connect
	Don't connect the fill lines around the inner perimeter. More...

bool	dont_adjust
	Don't adjust spacing to fill the space evenly. More...

bool	complete

Protected Types inherited from Slic3r::Fill
typedef std::pair< float, Point >	direction_t

Protected Attributes inherited from Slic3r::Fill
coordf_t	_spacing
	the actual one in unscaled coordinates, we fill this while generating paths More...

Constructor & Destructor Documentation

◆ ~FillConcentric()

virtual Slic3r::FillConcentric::~FillConcentric ( )

inlinevirtual

void Slic3r::FillConcentric::_fill_surface_single	(	unsigned int	thickness_layers,
		const direction_t &	direction,
		ExPolygon &	expolygon,
		Polylines *	polylines_out
	)

protectedvirtual

The expolygon may be modified by the method to avoid a copy.

Reimplemented from Slic3r::Fill.

virtual bool Slic3r::FillConcentric::can_solid ( ) const

inlineprotectedvirtual

Can this pattern be used for solid infill?

Reimplemented from Slic3r::Fill.

virtual Fill* Slic3r::FillConcentric::clone ( ) const

inlineprotectedvirtual

virtual bool Slic3r::FillConcentric::no_sort ( ) const

inlineprotectedvirtual

Do not sort the fill lines to optimize the print head path?

Reimplemented from Slic3r::Fill.

The documentation for this class was generated from the following files: