Here is a list of all class members with links to the classes they belong to:

- l -

• label : Slic3r::ConfigOptionDef
• label_printed_objects : Slic3r::GCodeConfig
• last : Slic3r::Chaining
• last_point() : Slic3r::ExtrusionEntity , Slic3r::ExtrusionEntityCollection , Slic3r::ExtrusionLoop , Slic3r::ExtrusionPath , Slic3r::MultiPoint , Slic3r::Polygon , Slic3r::Polyline
• last_pos() : Slic3r::GCode
• last_pos_defined() : Slic3r::GCode
• layer : Slic3r::GCode
• Layer() : Slic3r::Layer , Slic3r::LayerRegion
• layer() : Slic3r::LayerRegion
• Layer() : Slic3r::SLAPrint::Layer
• layer_count : Slic3r::GCode , Slic3r::PrintObject
• layer_gcode : Slic3r::GCodeConfig
• layer_height : Slic3r::PerimeterGenerator , Slic3r::PrintObjectConfig , Slic3r::SLAPrintConfig
• layer_height_ranges : Slic3r::ModelObject , Slic3r::PrintObject
• layer_height_spline : Slic3r::ModelObject , Slic3r::PrintObject
• layer_id : Slic3r::Fill , Slic3r::PerimeterGenerator
• layer_index : Slic3r::GCode
• LayerHeightSpline() : Slic3r::LayerHeightSpline
• layerHeightsUpdated() : Slic3r::LayerHeightSpline
• layers : Slic3r::PrintObject , Slic3r::SLAPrint
• layersUpdated() : Slic3r::LayerHeightSpline
• leftmost_point() : Slic3r::Polyline , Slic3r::PolylineCollection
• length() : Slic3r::ExtrusionEntity , Slic3r::ExtrusionLoop , Slic3r::ExtrusionPath , Slic3r::Line , Slic3r::MultiPoint
• lift() : Slic3r::GCodeWriter
• Line() : Slic3r::Line
• Linef() : Slic3r::Linef
• Linef3() : Slic3r::Linef3
• lines() : Slic3r::ExPolygon , Slic3r::ExPolygonCollection , Slic3r::Geometry::MedialAxis , Slic3r::MultiPoint , Slic3r::Polygon , Slic3r::Polyline
• link_max_length : Slic3r::Fill
• load : Slic3r::CLIConfig , Slic3r::ConfigBase
• looks_like_multipart_object() : Slic3r::Model
• loop_clipping : Slic3r::Fill
• loops : Slic3r::PerimeterGenerator
• lower_layer : Slic3r::Layer
• lower_slices : Slic3r::BridgeDetector , Slic3r::PerimeterGenerator