Here is a list of all class members with links to the classes they belong to:

- i -

• id : Slic3r::Extruder , Slic3r::Layer
• idx : Slic3r::Chaining , Slic3r::IO::AMFParserContext::Object
• index : Slic3r::Geometry::ArrangeItemIndex
• index_x : Slic3r::Geometry::ArrangeItem
• index_y : Slic3r::Geometry::ArrangeItem
• infill() : Slic3r::PrintObject , Slic3r::SLAPrint::Layer
• infill_acceleration : Slic3r::PrintConfig
• infill_area_threshold() : Slic3r::LayerRegion
• infill_every_layers : Slic3r::PrintRegionConfig
• infill_extruder : Slic3r::PrintRegionConfig
• infill_extrusion_width : Slic3r::PrintRegionConfig , Slic3r::SLAPrintConfig
• infill_first : Slic3r::PrintConfig
• infill_only_where_needed : Slic3r::PrintObjectConfig
• infill_overlap : Slic3r::PrintRegionConfig
• infill_speed : Slic3r::PrintRegionConfig
• info : Slic3r::CLIConfig , Slic3r::Log
• init_external_mp() : Slic3r::AvoidCrossingPerimeters
• init_layer_mp() : Slic3r::AvoidCrossingPerimeters
• input_file : Slic3r::ModelObject , Slic3r::ModelVolume
• input_file_obj_idx : Slic3r::ModelVolume
• input_file_vol_idx : Slic3r::ModelVolume
• Instance() : Slic3r::IO::AMFParserContext::Instance
• instance_bounding_box() : Slic3r::ModelObject
• instances : Slic3r::IO::AMFParserContext::Object , Slic3r::ModelObject
• interface_angle : Slic3r::toolpaths_params
• interface_density : Slic3r::toolpaths_params
• interface_flow : Slic3r::SupportMaterial
• interface_shells : Slic3r::PrintObjectConfig
• interface_spacing : Slic3r::toolpaths_params
• interior_brim_width : Slic3r::PrintConfig
• intersect_expolygons() : Slic3r::ExtrusionPath
• intersect_plane() : Slic3r::Linef3
• intersection() : Slic3r::Line , Slic3r::MultiPoint
• intersection_infinite() : Slic3r::Line
• IntersectionLine() : Slic3r::IntersectionLine
• IntersectionPoint() : Slic3r::IntersectionPoint
• invalidate() : Slic3r::PrintState< StepType >
• invalidate_all_steps() : Slic3r::Print , Slic3r::PrintObject
• invalidate_bounding_box() : Slic3r::ModelObject
• invalidate_state_by_config() : Slic3r::Print , Slic3r::PrintObject , Slic3r::PrintRegion
• invalidate_step() : Slic3r::Print , Slic3r::PrintObject
• InvalidOptionType() : Slic3r::InvalidOptionType
• InvalidOptionValue() : Slic3r::InvalidOptionValue
• is_bottom() : Slic3r::Surface
• is_bridge() : Slic3r::ExtrusionPath , Slic3r::Surface
• is_clockwise() : Slic3r::Polygon
• is_collection() : Slic3r::ExtrusionEntity , Slic3r::ExtrusionEntityCollection
• is_contour : Slic3r::PerimeterGeneratorLoop
• is_counter_clockwise() : Slic3r::Polygon
• is_done() : Slic3r::PrintState< StepType >
• is_external() : Slic3r::PerimeterGeneratorLoop , Slic3r::Surface
• is_infill() : Slic3r::ExtrusionEntity , Slic3r::ExtrusionLoop , Slic3r::ExtrusionPath
• is_internal() : Slic3r::Surface
• is_internal_contour() : Slic3r::PerimeterGeneratorLoop
• is_loop() : Slic3r::ExtrusionEntity , Slic3r::ExtrusionLoop
• is_manifold() : Slic3r::TriangleMesh
• is_perimeter() : Slic3r::ExtrusionEntity , Slic3r::ExtrusionLoop , Slic3r::ExtrusionPath
• is_positive_volume() : Slic3r::ConfigOptionPoint3
• is_solid() : Slic3r::Surface , Slic3r::SurfaceGroupAttrib
• is_solid_infill() : Slic3r::ExtrusionEntity , Slic3r::ExtrusionLoop , Slic3r::ExtrusionPath
• is_started() : Slic3r::PrintState< StepType >
• is_straight() : Slic3r::Polyline
• is_support() : Slic3r::Layer , Slic3r::SupportLayer
• is_valid() : Slic3r::ExPolygon , Slic3r::MultiPoint , Slic3r::Polygon
• island : Slic3r::MotionPlannerEnv
• islands_count() : Slic3r::MotionPlanner
• item : Slic3r::Geometry::ArrangeItemIndex
• items_count() : Slic3r::ExtrusionEntityCollection
• iterator_holes_type : boost::polygon::polygon_with_holes_traits< ExPolygon >
• iterator_type : boost::polygon::polygon_set_traits< ExPolygons > , boost::polygon::polygon_set_traits< Polygons > , boost::polygon::polygon_traits< ExPolygon > , boost::polygon::polygon_traits< Polygon >