Here is a list of all class members with links to the classes they belong to:

- s -

• save : Slic3r::CLIConfig , Slic3r::ConfigBase
• scale() : Slic3r::BoundingBoxBase< PointClass > , Slic3r::CLIConfig , Slic3r::ExPolygon , Slic3r::ExPolygonCollection , Slic3r::IO::AMFParserContext::Instance , Slic3r::Line , Slic3r::Linef3 , Slic3r::ModelObject , Slic3r::MultiPoint , Slic3r::Point , Slic3r::Pointf3 , Slic3r::Pointf , Slic3r::TriangleMesh
• scale_set : Slic3r::IO::AMFParserContext::Instance
• scale_to_fit : Slic3r::CLIConfig , Slic3r::ModelObject
• scaled_spacing() : Slic3r::Flow
• scaled_width() : Slic3r::Flow
• scaling_factor : Slic3r::ModelInstance
• scaling_vector : Slic3r::ModelInstance
• seam_position : Slic3r::PrintObjectConfig
• sequential_print_priority : Slic3r::PrintObjectConfig
• serial_port : Slic3r::HostConfig
• serial_speed : Slic3r::HostConfig
• serialize() : Slic3r::ConfigBase , Slic3r::ConfigOption , Slic3r::ConfigOptionBool , Slic3r::ConfigOptionBools , Slic3r::ConfigOptionEnum< T > , Slic3r::ConfigOptionEnumGeneric , Slic3r::ConfigOptionFloat , Slic3r::ConfigOptionFloatOrPercent , Slic3r::ConfigOptionFloats , Slic3r::ConfigOptionInt , Slic3r::ConfigOptionInts , Slic3r::ConfigOptionPercent , Slic3r::ConfigOptionPoint3 , Slic3r::ConfigOptionPoint , Slic3r::ConfigOptionPoints , Slic3r::ConfigOptionString , Slic3r::ConfigOptionStrings
• set() : boost::polygon::point_mutable_traits< Point > , boost::polygon::polygon_set_mutable_traits< ExPolygons > , boost::polygon::polygon_set_mutable_traits< Polygons > , Slic3r::Config , Slic3r::ConfigOption , Slic3r::ConfigOptionFloatOrPercent , Slic3r::ConfigOptionSingle< T > , Slic3r::ConfigOptionVector< T > , Slic3r::GCodeReader::GCodeLine , Slic3r::PlaceholderParser , Slic3r::SurfaceCollection
• set_acceleration() : Slic3r::GCodeWriter
• set_bed_temperature() : Slic3r::GCodeWriter
• set_copies() : Slic3r::PrintObject
• set_defaults() : Slic3r::StaticConfig
• set_deserialize() : Slic3r::ConfigBase , Slic3r::PrintConfigBase
• set_done() : Slic3r::PrintState< StepType >
• set_extruder() : Slic3r::GCode , Slic3r::GCodeWriter
• set_extruders() : Slic3r::GCode , Slic3r::GCodeWriter
• set_fan() : Slic3r::GCodeWriter
• set_holes() : boost::polygon::polygon_with_holes_mutable_traits< ExPolygon >
• set_id() : Slic3r::Layer
• set_last_pos() : Slic3r::GCode
• set_material() : Slic3r::ModelVolume
• set_origin() : Slic3r::GCode
• set_points() : boost::polygon::polygon_mutable_traits< ExPolygon > , boost::polygon::polygon_mutable_traits< Polygon >
• set_solid_spacing() : Slic3r::Flow
• set_spacing() : Slic3r::Flow
• set_speed() : Slic3r::GCodeWriter
• set_started() : Slic3r::PrintState< StepType >
• set_temperature() : Slic3r::GCodeWriter
• setenv_() : Slic3r::ConfigBase
• setFloat() : Slic3r::ConfigOption , Slic3r::ConfigOptionFloat
• setInt() : Slic3r::ConfigOption , Slic3r::ConfigOptionFloat , Slic3r::ConfigOptionInt
• setLayers() : Slic3r::LayerHeightSpline
• setObjectHeight() : Slic3r::LayerHeightSpline
• setString() : Slic3r::ConfigOption
• shortcut : Slic3r::ConfigOptionDef
• shortest_path() : Slic3r::MotionPlanner , Slic3r::MotionPlannerGraph
• sidetext : Slic3r::ConfigOptionDef
• simplify() : Slic3r::ExPolygon , Slic3r::ExPolygonCollection , Slic3r::ExtrusionPath , Slic3r::Polygon , Slic3r::Polyline , Slic3r::SurfaceCollection
• simplify_by_visibility() : Slic3r::Polyline
• simplify_p() : Slic3r::ExPolygon
• size() : boost::polygon::polygon_traits< ExPolygon > , boost::polygon::polygon_traits< Polygon > , Slic3r::BoundingBox3Base< PointClass > , Slic3r::BoundingBoxBase< PointClass > , Slic3r::ExPolygonCollection , Slic3r::ExtrusionEntityCollection , Slic3r::PrintObject , Slic3r::SurfaceCollection , Slic3r::TriangleMesh
• size_holes() : boost::polygon::polygon_with_holes_traits< ExPolygon >
• skip : Slic3r::IntersectionLine
• skirt : Slic3r::Print
• skirt_distance : Slic3r::PrintConfig
• skirt_first_layer_height() : Slic3r::Print
• skirt_flow() : Slic3r::Print
• skirt_height : Slic3r::PrintConfig
• skirts : Slic3r::PrintConfig
• SLAPrint() : Slic3r::SLAPrint
• slice : Slic3r::CLIConfig , Slic3r::PrintObject , Slic3r::SLAPrint , Slic3r::TriangleMesh , Slic3r::TriangleMeshSlicer< A >
• slice_facet() : Slic3r::TriangleMeshSlicer< A >
• slice_z : Slic3r::Layer , Slic3r::SLAPrint::Layer
• slices : Slic3r::Layer , Slic3r::LayerRegion , Slic3r::PerimeterGenerator , Slic3r::SLAPrint::Layer
• slicing_errors : Slic3r::Layer
• SlicingAdaptive() : Slic3r::SlicingAdaptive
• slowdown_below_layer_time : Slic3r::PrintConfig
• sm_pillars : Slic3r::SLAPrint
• small_perimeter_speed : Slic3r::PrintRegionConfig
• solid : Slic3r::SLAPrint::Layer
• solid_infill : Slic3r::SLAPrint::Layer
• solid_infill_below_area : Slic3r::PrintRegionConfig
• solid_infill_every_layers : Slic3r::PrintRegionConfig
• solid_infill_extruder : Slic3r::PrintRegionConfig
• solid_infill_extrusion_width : Slic3r::PrintRegionConfig
• solid_infill_flow : Slic3r::PerimeterGenerator
• solid_infill_speed : Slic3r::PrintRegionConfig
• solid_spacing() : Slic3r::Flow
• sorted() : boost::polygon::polygon_set_traits< ExPolygons > , boost::polygon::polygon_set_traits< Polygons >
• spacing() : Slic3r::Fill , Slic3r::Flow
• spiral_vase : Slic3r::PrintConfig
• SpiralVase() : Slic3r::SpiralVase
• split() : Slic3r::ModelObject , Slic3r::TriangleMesh
• split_at() : Slic3r::ExtrusionLoop , Slic3r::Polyline
• split_at_first_point() : Slic3r::Polygon
• split_at_index() : Slic3r::Polygon
• split_at_vertex() : Slic3r::ExtrusionLoop , Slic3r::Polygon
• standby_points : Slic3r::OozePrevention
• standby_temperature_delta : Slic3r::PrintConfig
• start_filament_gcode : Slic3r::GCodeConfig
• start_gcode : Slic3r::GCodeConfig
• started : Slic3r::PrintState< StepType >
• startElement() : Slic3r::IO::AMFParserContext , Slic3r::IO::TMFParserContext
• state : Slic3r::Print , Slic3r::PrintObject
• StaticConfig() : Slic3r::StaticConfig
• StaticPrintConfig() : Slic3r::StaticPrintConfig
• stats() : Slic3r::TriangleMesh
• status_cb : Slic3r::Print
• step_done() : Slic3r::Print
• stl : Slic3r::TriangleMesh
• stop() : Slic3r::IO::AMFParserContext , Slic3r::IO::TMFParserContext
• stroke : Slic3r::SVG
• subtract_expolygons() : Slic3r::ExtrusionPath
• support_density : Slic3r::toolpaths_params
• support_fills : Slic3r::SupportLayer
• support_interface_fills : Slic3r::SupportLayer
• support_islands : Slic3r::SupportLayer
• support_layer_count() : Slic3r::PrintObject
• support_layers : Slic3r::PrintObject
• support_layers_z() : Slic3r::SupportMaterial
• support_material : Slic3r::PrintObjectConfig , Slic3r::SLAPrintConfig
• support_material_angle : Slic3r::PrintObjectConfig
• support_material_buildplate_only : Slic3r::PrintObjectConfig
• support_material_contact_distance : Slic3r::PrintObjectConfig
• support_material_enforce_layers : Slic3r::PrintObjectConfig
• support_material_extruder : Slic3r::PrintObjectConfig
• support_material_extruders() : Slic3r::Print , Slic3r::PrintObject
• support_material_extrusion_width : Slic3r::PrintObjectConfig , Slic3r::SLAPrintConfig
• support_material_interface_extruder : Slic3r::PrintObjectConfig
• support_material_interface_extrusion_width : Slic3r::PrintObjectConfig
• support_material_interface_layers : Slic3r::PrintObjectConfig
• support_material_interface_spacing : Slic3r::PrintObjectConfig
• support_material_interface_speed : Slic3r::PrintObjectConfig
• support_material_max_layers : Slic3r::PrintObjectConfig
• support_material_pattern : Slic3r::PrintObjectConfig
• support_material_pillar_size : Slic3r::PrintObjectConfig
• support_material_pillar_spacing : Slic3r::PrintObjectConfig
• support_material_spacing : Slic3r::PrintObjectConfig , Slic3r::SLAPrintConfig
• support_material_speed : Slic3r::PrintObjectConfig
• support_material_threshold : Slic3r::PrintObjectConfig
• support_spacing : Slic3r::toolpaths_params
• SupportLayer() : Slic3r::SupportLayer
• SupportPillar() : Slic3r::SLAPrint::SupportPillar
• Surface() : Slic3r::Surface
• surface_type : Slic3r::Surface
• SurfaceCollection() : Slic3r::SurfaceCollection
• SurfaceGroupAttrib() : Slic3r::SurfaceGroupAttrib
• surfaces : Slic3r::SurfaceCollection
• SVG() : Slic3r::SVG
• swap() : Slic3r::DynamicConfig , Slic3r::ExtrusionEntityCollection , Slic3r::Model , Slic3r::TriangleMesh